Huber Needles

Microbore Tubing

Non-Coring, 90 Degree Huber Needle with Pre-Attached Administration Set

REORDER PROD CODE GAUGE LENGTH
50-1921 M1975 19GA .75″
50-1931 M191 19GA 1.0″
50-2011 M205 20GA .50″
50-2021 M2075 20GA .75″
50-2031 M201 20GA 1.0″
50-2041 M2015 20GA 1.50″
50-2211 M225 22GA .50″
50-2221 M2275 22GA .75″
50-2231 M221 22GA 1.0″
50-2241 M2215 22GA 1.50″

7” NON-CORING WINGED ADMINISTRATION SET WITH PINCH CLAMP, NON-DEHP PVC TUBING, LATEX FREE, LIPID RESISTANT. APPROXIMATE FILL VOLUME .25ML. 12 PER BOX

Microbore Tubing with Y-Injection Site

Non-Coring, 90 Degree Huber Needle with Pre-Attached Administration Set

REORDER PROD CODE GAUGE LENGTH
50-1912 M195Y 19GA .50”
50-1922 M1975Y 19GA .75”
50-1932 M191Y 19GA 1.0”
50-1942 M1915Y 19GA 1.5”
50-2012 M205Y 20GA .50”
50-2022 M2075Y 20GA .75”
50-2032 M201Y 20GA 1.0
50-2042 M2015Y 20GA 1.5”
50-2212 M225Y 22GA .50”
50-2222 M2275Y 22GA .75”
50-2232 M221Y 22GA 1.0”
50-2242 M2215Y 22GA 1.5”

9” NON-CORING WINGED ADMINISTRATION SET WITH Y-INJECTION SITE, PINCH CLAMP, NON-DEHP PVC TUBING, LATEX FREE, LIPID RESISTANT. APPROXIMATE FILL VOLUME .35ML. 12 PER BOX

Standard Bore Tubing

Non-Coring, 90 Degree Huber Needle with Pre-Attached Administration Set

REORDER PROD CODE GAUGE LENGTH
50-1923 M1975S 19GA .75”
50-1933 M191S 19GA 1.0”
50-2013 M205S 20GA .50”
50-2023 M2075S 20GA .75”
50-2033 M201S 20GA 1.0”
50-2043 M2015S 20GA 1.5”
50-2213 M225S 22GA .50”
50-2223 M2275S 22GA .75”
50-2233 M221S 22GA 1.0”
50-2243 M2215S 22GA 1.5”

7” STANDARD BORE WINGED ADMINISTRATION SET WITH PINCH CLAMP. NON-DEHP PVC TUBING, LATEX FREE, LIPID RESISTANT. APPROXIMATE PRIMING VOLUME .6ML. 12 PER BOX

90 Degree Bend

Non-Coring, 90 Degree Huber Needle

REORDER PROD CODE GAUGE LENGTH
55-1910 M195H 19GA ..50”
55-1920 M1975H 19GA .75”
55-1930 M191H 19GA 1.0”
55-1940 M1915H 19GA 1.5”
55-2010 M205H 20GA .50”
55-2020 M2075H 20GA .75”
55-2030 M201H 20GA 1.0”
55-2040 M2015H 20GA 1.5”
55-2210 M225H 22GA ..50”
55-2220 M2275H 22GA .75”
55-2230 M221H 22GA 1.0”
55-2240 M2215H 22GA 1.5”

90 DEGREE NON-CORING HUBER NEEDLE. 12 PER BOX

Straight

Non-Coring, Straight Huber Needle

REORDER PROD CODE GAUGE LENGTH
55-2035 M201HS 20GA 1.0”
55-2045 M2015HS 20GA 1.5”
55-2225 M2275HS 22GA .75”
55-2235 M221HS 22GA 1.0”
55-2245 M2215HS 22GA 1.5”

STRAIGHT NON-CORING HUBER NEEDLE. 12 PER BOX.

Our Huber Needles
  • Have a tip design that initiates penetration of the patient’s skin and the port’s septum easily and comfortably.
  • Are manufactured to ALL-MED’s specifications and assure port integrity.
  • Are bent to exacting standards but are not lubricated to ensure needle retention.
  • Are fixed in place (non-rotating) and wings are easily grasped for comfortable insertion technique.
  • An optional insertion technique. Placing the index finger onto the notch on the body of the wing gives superior control and insertion with less effort.
  • Have a flat wing base that is uniform and solid offering no nooks, crevices or absorbent materials. The holes in the wing enhance air circulation and can be used for suturing.
  • Are color coded by needle gage size and needle length is consistent and easily measured.
  • Use only strong, non-kink tubing and a clamp that can be controlled with one hand.
  • Use only the highest-quality luer locks that maintain dimensional stability to assure a non-leak fit.
  • Use Latex-Free and lipid-resistant materials and Non-DEHP PVC Tubing.